20
ATIM_ACW-THAQ_UG_FR_V1.7
For a
Sigfox
device
1.
Sigfox
(default): Modulation and Sigfox Protocol used. This is the product's default mode. This mode
requires access to the Sigfox network to operate.
2.
Local mode
: The modulation of the frames switches to FSK. In this mode, you must choose the radio
channel on which the product will transmit. To be able to receive the product frames, a radio modem
with the same parameters is then required. This mode has no real concrete use case for the moment,
but future developments of this mode will provide interesting point-to-point features.
3.
Compatibility mode with the ATIM FSK / Sigfox Repeater
: This mode should be selected when you
want to operate in Sigfox, but the network is not accessible. This mode, associated with the ATIM FSK
/ Sigfox Repeater, then makes it possible to join the Sigfox network through this repeater. In this mode,
the product transmits these frames both on the Sigfox network and in Local (FSK modulation). The FSK
/ Sigfox repeater then relays these frames on the Sigfox network (The repeater must be placed in a
location where the Sigfox network is accessible).
NOTE IMPORTANTE
If the product has access to the Sigfox network, the default operating mode (Sigfox) must be used. If this mode is chosen, th e
product will always send a frame on the Sigfox network and this same frame in Local mode to the Repeater, which will consume
battery unnecessarily.
Product clock
If the time stamping function is activated, it is essential to configure the internal clock of the product from the
configurator, which will retrieve the system clock from the computer to apply it to the product
.
Product versions
When connecting to the product, the configurator retrieves all the software versions of the product (product software
and radio module software) as well as the network identifier
.
7
8
