16
ATIM_ACW-THAQ_UG_EN_V1.7
j.
Night mode
The ACW-THAQ allows to stop measurement and radio emission during a given time slot (this time slot is
customizable). The primary purpose of this feature is to reduce the power consumption of the sensor
throughout the day to increase its autonomy
In operation, the sensor will therefore automatically stop the radio emission from the start time configured for this
mode and will restart, again automatically, at the configured end time.
In addition, this mode can be activated or deactivated at any time during the operation of the sensor.
Activation/deactivation as well as the configuration of the start and end times can be done via the
ACW Configurator
application or by
Downlink
.
