13
ATIM_ACW-DINRSM_UG_EN_V2.8
Four major sections can be distinguished here. The ‘Serial parameters’ section is at the top left, “
Other parameter
s”
at the center left, the Modbus configuration section at the right and the debugging area at the bottom.
Parameter settings for Radio and Modbus frames
In the Modbus section at the right, you can add radio (network) and Modbus frames, add a Modbus frame to a radio
(network) frame, edit a Modbus frame as well as delete and test Modbus frames. Right-clicking in this area will open
a context menu (shown below) that lists the various actions just described. You can also access these actions more
quickly by using the keyboard shortcuts shown on the right side of the context menu.
When adding or editing a Modbus frame, a window like the one below will appear. Use this window to configure all
the parameters for your Modbus frame.
NOTE
To edit the Radio (Network) header, you will have to edit the first Modbus frame.
The number of Modbus and radio (network) frames is limited. Just above the frame configuration area in the main
window, you will see a summary of the number of frames that you have used and the total number that you can use.
In Sigfox, you can configure one frame every ten minutes for a maximum of 6 frames every hour. +
In LoRaWAN, you can configure one frame every four minutes for a maximum of 15 frames every hour.
