ATIKA ST 200 N Original Instructions Manual Download Page 17

Page: 17 / 110

Maintain

your radial tile cutter with care:

−

Keep the

tools

sharp and clean to be able to work better

and more safely.

−

Follow the

servicing instructions

and the information

about changing tools.

−

Keep

handles

dry and free of oils and grease.

Check the machine for possible damage:

−

Before continuing to use the machine, the

protective

devices

must be inspected to ensure that they work

perfectly and with their intended function

−

Check whether the

movable parts

function perfectly

and do not stick or whether the parts are damaged, All
parts must be correctly installed and fulfil all conditions
to ensure perfect operation of the radial tile cutter

−

Damaged guards

and parts must be properly repaired

or exchanged by a recognized, specialist workshop;
insofar as nothing else is stated in the instructions for
use.

−

Damaged or illegible

safety warning labels

should be

replaced

immediately.

Do not allow any tool key to be plugged in!

Store the

unused machine

in a dry locked place away from

the reach of children.

Do not carry power tools with the finger placed on the
switch. Make sure that the switch is off before connecting
the mains plug with the outlet socket.

Electrical safety

Design of the

connection cable

according to IEC 60 245

(H 07 RN-F) with a core cross-profile section of at least

1.5 mm

for cable lengths

up to

25 m

2.5 mm

for cable lengths

over

25 m

Long and thin connection lines result in a potential drop.
The motor does not reach any longer its maximal power; the
function of the device is reduced.

Plugs

and

coupler outlets

on connection cables must be

made of rubber, non-rigid PVC or other thermoplastic
material of same mechanical stability or be covered with this
material.

The connector of the connection cable must be

splash-

proof

When running the

connection line

observe that it does not

interfere, is not squeezed, bended and the plug connection
does not get wet.

Do not use the

cable

for purposes for which it is not meant.

Protect

the cable against

heat, oil and sharp edges

. Do

not use the cable to pull the plug from the socket.

Wind off completely the cable when using a cable drum.

Regularly check the

extension cables

and replace them if

they are damaged.

not use any defective connection cables.

When working outdoors, only use extension cables
especially

approved

and appropriately labelled for outdoor

use.

not set up any provisional

electrical connections.

Never bypass

protective devices or deactivate them.

The device must be connected via the fitted PRCD
(residual-current-operated circuit breaker).

The

electrical connection

repairs

to electrical parts of

the machine must be carried out by a certified electrician
or one of our customer service points. Local regulations –
especially regarding protective measures – must be
observed.

Repairs

to other parts of the machine must be carried out

by the

manufacturer

or one of his customer service

points.

Use only original

spare. Accidents can arise for the user

through the

use of other spare parts

. The manufacturer

is not liable for any damage or injury resulting from such
action.