ATI Technologies RADEON 9500 SERIES, Getting Started Manual

Page: 15 / 27

12 Getting Started
The optional S-Video TV Out connector on your ATI
Graphics Accelerator card can be used to connect to your
TV, VCR, or camcorder. If your TV, VCR, or camcorder
only supports a composite connector, a S-Video-to-
Composite connector can be purchased that allows you
to connect to a device with a composite connector. See
Getting Additional Accessories on page 16 .
Windows
®
New Hardware Found
Windows may start the Add New Hardware Wizard to
install the Standard VGA Driver. To correctly install
your new hardware:
Cancel the Wizard if you are using Windows
®
2000 or
Windows
®
XP, and proceed to Installing the
CATALYST™ Software Suite on page 13 .
If the Add New Hardware Wizard does not appear,
proceed to Installing the CATALYST™ Software Suite
on page 13.
If the Add New Hardware Wizard does appear:
1
Click Next to allow Windows
®
to search for the
Standard VGA or Standard PCI Graphics Adapter.
If prompted for the Windows
®
CD-ROM, insert it
into your CD-ROM drive.
2
Type the following: D:\<Operating System name> for
example
D:\WinME
If D is not your CD-ROM drive, substitute D with the
correct drive letter.
3
Click OK .
4
Click Finish to close the Wizard. The system should
now be restarted.