ATI
Q46UV UV254/Turbidity Monitor
Part 2
– Analyzer Mounting
9
O&M Manual
Rev-D (11/19)
2.2
Wall or Pipe Mount
A PVC mounting bracket with attachment screws is supplied with each transmitter (see Figure 2
for dimensions). The multi-purpose bracket is attached to the rear of the enclosure using the four
flat head screws. The instrument is then attached to the wall using the four outer mounting holes
in the bracket. These holes are slotted to accommodate two sizes of u-bolt that may be used to
pipe mount the unit. Slots will accommodate u-bolts designed for 1½
“or 2” pipe. The actual
center to center dimensions for the u-bolts are shown in the drawing. Note that these slots are for
u-bolts with ¼-
20 threads. The 1½” pipe u-bolt (2” I.D. clearance) is available from ATI in type
304 stainless steel under part number 47-0005
Figure 2 - Wall or Pipe mount bracket
