Installing the Hardware and Software 23
Software Installation for Windows 2000 and
Windows XP
1
Start your system. When the
Found New Hardware
Wizard
comes up, click
Cancel
. When the
System
Settings Change
window asks you to restart your
computer, click
No
.
2
Run the Quick Start utility. The Quick Start utility will
start automatically, if you insert the Fire GL CD into your
CD-ROM drive after the operating system has started. If
your CD-ROM auto-run is not enabled and/or the Quick
Start program does not start automatically:
Click the
Start
button in the task bar, click
Run
, and then
select
START.EXE
from the root directory of the Fire GL
CD.
3
Click
Start Installation
.
4
Click the button corresponding to the type of installation
you want. If you select
Custom
, a list of software
components will be displayed. Select the check boxes to
specify the components you want to install.
5
Click
Next
to continue the installation.
6
When the
ATI FGL Install
dialog displays the
components to be installed click on
Next
. (Depending on
which components you chose different windows might
appear. Click on the corresponding buttons to continue the
installation.)
7
When the
Installation complete
message appears click
Next
again. This will restart your computer.
Note
Windows 2000: If your Windows 2000 is not correctly
updated with Service Pack 1, the driver installation
stops. Obtain Windows 2000 Service Pack 1 from
Microsoft, update your Windows 2000, and run the
Quick Start utility again
