ATI Corporation Preseeder 365, Operator'S Manual

Page: 15 / 29

9
TRACTOR OPERATION
DO NOT Engage the
Attachment when TOW
VALVE is in the ON position.
OPERATING THE DIRECTIONAL
CONTROLS
STOPPING MOVEMENT WITH ENGINE
RUNNING
1. RELEASE the HYDROSTATIC CONTROL
LEVER, A. The lever will automatically go
the neutral position as shown (See Figure
15).
2. When the hydrostatic lever is in the neutral
position the machine will not move.
VARIABLE SPEED CONTROL
ADJUSTMENT
1. Adjust to slowest speed.
The maximum forward and reverse speeds can
be adjusted to meet specific operating condi-
tions by moving the Control Knob, A, in the
adjustment slot (See Figure 16).
Adjust to slowest speed set-
ting, B, while learning to
operate the machine and when operating in
confined spaces.
NOTE: Only adjust the variable speed
control when the engine is stopped.
ADJUSTING THE VARIABLE SPEED
CONTROL
1. Loosen the control knob, A.
2. Move the VARIABLE SPEED CONTROL
KNOB forward to the FAST position to
increase maximum speed. (Knob shown in
fastest position.)
3. Move the VARIABLE SPEED CONTROL
KNOB rearward to the SLOW position to
decrease maximum speed.
FIGURE 14 Tow Valve Off
FIGURE 15 Stopping Movement
FIGURE 16 Variable Speed Control Setting