57
SL1 DATA LOGGER User Manual Rev. AD
ENGLISH
4
AN/FRQ PANEL (PHYSICAL INPUTS: AN1..AN3, IC1)
The AN/FRQ panel can be opened by pressing Config Channel Tree AN/FRQ.
This panel is used to configure the analogue and frequency inputs.
Press the EDIT button to configure a channel: the Channel Calibration window will open.
The Channel Calibration window can be used to change the following properties:
•
Name: the name of the channel.
•
Log frq: the acquisition frequency, if this parameter is set to None, the channel will not be
acquired and will not be available for software analysis*.
•
Decimals: the number of decimals to be displayed.
•
Unit: the unit of measurement of the channel.
•
Calibration Type: the type of channel calibration.
•
Calibration Value: the channel calibration values.
•
Channel Description: a channel comment that is displayed when the mouse is moved over the
name of the channel.
Configure as necessary and save the setup to a file
or send it to the SL1 Data Logger when finished (see
and
)
* NOTE: the acquisition frequency can be changed
directly in the AN/FRQ table
Summary of Contents for GET SL1
Page 1: ...ENGLISH DATA LOGGER User Manual...
Page 15: ...15 SL1 DATA LOGGER User Manual Rev AD sales get athena eu www getdata it ENGLISH 2 Driver...
Page 90: ...90 SL1 DATA LOGGER User Manual Rev AD sales get athena eu www getdata it ENGLISH NOTES...
Page 91: ...91 SL1 DATA LOGGER User Manual Rev AD sales get athena eu www getdata it ENGLISH NOTES...
