® Copyright by ATH-Heinl GmbH & Co. KG, 2019, All rights reserved / Misprint and technical changes reserved / Issue: 2019/02
- 12 -
Place of installation
The machine should be kept away from flammable and explosive materials as well as from solar radiation
and intensive light. The machine should also be installed in a well-ventilated place.
The tire changer must be placed on a concrete floor or similar solid flooring.
When selecting the place of installation, besides the soil condition also the guidelines and instructions of
the accident prevention regulations and workplace regulations must be observed.
When installing on an intermediate ceiling the capacity must be checked before. Generally, it is
recommended to ask a technical expert when installing on an intermediate ceiling.
It is not allowed to install the machine outside, but only inside, as the machine has no corresponding safety
provisions (IP-protection, zinc coated and so on)
Temperature
4-40 °C
Sea level
< 1000 m
Air humidity
50% at 40°C
–
90% at 20 °C
Summary of Contents for M72Z
Page 1: ...USER S MANUAL ATH M72Z...
