® Copyright ATH-Heinl GmbH & Co. KG, 2018, All rights reserved. / Misprints and technical changes reserved / Issue: 08/2014
6
1. Drive-on ramp second platform - main lift
2. Drive-on ramp main platform - main lift
They will be raised by means of the internal scissor lifting system (6) and hydraulic cylinder (7).
3. Freewheel lift
Enables an additional lifting of the vehicle on the rocker panel.
4. Basic frame
For fixing the lift.
5. Rolling jack (optional)
Enables an additional lifting of the vehicle on the axis or chassis.
6. Scissor lifting system
7. Hydraulic lifting cylinder
8. Cover plates
Enables an use of optional turn plates for wheel alignment
9. Control box
Includes the complete electrical control system. All push buttons are protected by a front ring for preventing an
accidental pushing of the button. Furthermore all movements will be interrupted immediately while releasing the
button. ( Deadman control).
Inclusive hydraulic aggregate
With this the hydraulic oil in the tank will be leaded over a gear pump, which is driven by the motor, to the
cylinder. Via a lowering valve the oil will be leaded back again into the tank.
10. Safety notches on main- and freewheel lift
This safety device prevents a lowering of the lift of more than 100 mm in case of any arbitrary defect. Electric
magnets are unlocking this device when lowering the lift.
11. Light barrier
Guarantees a secure synchronization of both scissors.
