® Copyright ATH-Heinl GmbH & Co. KG, 2018, All rights reserved. / Misprints and technical changes reserved / Issue: 08/2014
17
Installation of the lift
This manual is not to be seen as an assembly instruction but only as a help and advice for skilled personal. For
the following works are necessary adequate clothes and individual safety devices. An incorrect installation and
adjustment causes disclaimer of warranty.
1. Positioning and alignment of scissor pairs
a. For IN-GROUND INSTALLATION:
Position both scissor pairs in the existing cavity and put the switching box at the intended place.
For ON-GROUND INSTALLATION:
Position both scissor pairs parallel to each other and put the switching box, as indicated in the technical
data, at the intended place. Before fixing with dowels make sure that both scissors are aligned, if
necessary align with washers or plates.
2. Connection of hydraulic hoses
a. Open the front cover of the switching box.
b. Connect the hydraulic hose resp. hoses as shown below.
Retighten all hydraulic connections.
Main lift
Freewheel lift
B-1 = Main cylinder
B-2 = Second cylinder
A-1 = Main cylinder
A-2 = Second cylinder
