® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-07
Produkthersteller ATH-Heinl GmbH & CO.KG
- 9 -
Place of installation
The machine should be kept away from flammable and explosive materials as well as from solar radiation and intensive
light. The machine should also be installed in a well-ventilated place.
The tire changer must be placed on a concrete floor or similar solid flooring.
When selecting the place of installation, besides the soil condition also the guidelines and instructions of the accident
prevention regulations and workplace regulations must be observed.
When installing on an intermediate ceiling the capacity has to be checked before. Generally it is recommended to ask
a technical expert when installing on an intermediate ceiling.
It is not allowed to install the machine outside, but only inside, as the machine has no corresponding safety provisions
(IP-protection, zinc coated and so on)
Temperature
4-40 °C
Sea level
< 1000 m
Air humidity
50% bei 40°C – 90% bei 20 °C
