10
Later Production Installation
INSTALLING VIBS LATER PRODUCTION METHOD,
DISCONNECT BACKGLASS WIRING
Starting with the setup in the image,
we will begin by removing the backglass
cable from the Signal Transfer Board.
A
Make sure the black bar is unlocked on
the Signal Transfer Board (see Page 6
for a refresher).
B
Carefully remove the EDP cable from
the Signal Transfer board. If the cable
does not want to move away from the
board, then the EDP lock (black bar) is
still in the locked position.
C
WARNING:
THIS IS A NON-STANDARD
HDMI PORT. DO NOT PLUG ANY OTHER
HDMI CABLE INTO THIS PORT OR YOU
COULD DAMAGE YOUR EQUIPMENT.
