6
Images and instructions are for reference only and subject to change. © 2022 AtGames.
HOW TO INSTALL TRACKBALL ONTO QUADPLAY
Assemble the trackball case and ENSURE the cable
slot on the trackball case, circled in yellow, is
pointing toward the white button.
Step 7
Fasten the included 3 #SA screws, circled in
yellow.
Step 8
Fasten the included 4 #SB screws, circled in blue.
Attach the included red/white cable to the CTR board
and trackball case. Does not matter which cable end
goes to which port. Shown with yellow arrows.
Note: The slot on the CTR board is marked “TRACKBALL”.
Step 9
Step 10
Using the 8 screws removed in Step 1, fasten them
to secure the QuadPlay control panel case and
attach the 8 removed covers.
Step 12
Attach the QuadPlay control panel's bottom
casing removed from Step 2.
Step 11
