www.atestgaz.pl
The cable shall be placed in the detector as shown on figure 2. It is necessary to make sure that the shield
protection is not located in the rubber element of the cable entry and that the smallest part of the cable
external sheath was located inside the detector.
When laying the cable inside the detector enclosure, it must be remembered that:
cables should be ordered,
connecting cables should be kept as far away from the detector electronics as possible and routed
as directly as possible to the crimp connection,
it is necessary to minimize the amount of unnecessary conductor on the detector electronics. It is
unacceptable to leave a reserve inside the detector.
Atest Gaz
A. M. Pachole sp. j.
ul. Spokojna 3, 44-109 Gliwice, Poland
VAT No.: PL 9691433231
tel.: +48 32 238 87 94
fax: +48 32 234 92 71
e-mail: [email protected]
p. 2/2
Appendix: PU-Z-015-ENG R02
•
Figure 2: Placing cables in the detector
Summary of Contents for ProGas 4
Page 1: ...POD 064 ENG R05 User Manual Gas Detector ProGas 4 Product code PW 017 PG4 X...
Page 45: ...www atestgaz pl Notes...
Page 46: ...www atestgaz pl Notes...
Page 47: ......
