Atest Gaz EcoAlpa5, User Manual

Page: 3 / 28

www.atestgaz.pl
Remarks and reservations
Connection and operation of the device is allowed only after reading and understanding the
contents of this document. Keep User's Manual with the device for future use.
The manufacturer bears no responsibility for errors, damages and failures caused by improper
selection of devices and cables, improper installation or failure to understand the contents of this
document.
Unauthorised repairs and modifications of the device are not allowed. The manufacturer bears no
responsibility for the results of such interventions.
Excessive mechanical, electrical or environmental exposure may result in damage to the device.
Use of damaged or incomplete devices is not allowed.
The design of the gas detection system for a protected facility may involve other requirements
throughout all stages of the product life.
It is unacceptable to use parts other than those specified in table 15.
How to use this manual?
The following symbols of optical indicators status are used throughout the document:
Symbol Interpretation
Optical indicator on
Optical indicator flashing
Optical indicator off
Optical indicator status not determined (depends on other factors)
Table 1: Optical indicators status notation
Important parts of the text are marked as follows:
Pay special attention to information given in these fields.
This User Manual consists of a main text and attached appendices. The appendices are
independent documents and can be used separately from this Manual. Page numbering of
appendices starts anew with no relationship to page numbering of the main document and
appendices may have their own tables of contents. In the right bottom corner of each page you
can find the name (symbol) of any document included into the User Manual package with its
revision (issue) number.
s. 3|25
User Manual: POD-057-ENG R01