Atest Gaz Alpa EcoWent XT, User Manual

Page: 8 / 48

www.atestgaz.pl
Do not install a gas detector in places exposed to direct sunlight and water.
In the case of damage, shut down the detector, secure the connection cables, and conduct
the service.
All activities related to connecting detectors, signallers and other system components must
be carried out while Control Unit's power supply is off.
Although switching power supply of the Gas Safety System off, there is a possibility that
a dangerous voltage can exist on the terminals of the Control Unit. It can originate from
another system like for an example ventilation system that uses one of the output pins of
Control Unit.
When performing repair, building and maintenance works, secure the device in a proper
way.
Before painting the walls, make sure the device is secured.
Before painting the floors, make sure the device is secured.
Before using silicons or silicon-containing materials (paints, glues, sealing etc.), make sure
the device is secured.
p. 8|24
User Manual: POD-042-ENG R04