ATESS EVA-11D, User Manual, Page: 9 / 18

14 13
(23) Over temperature protection value, not suggested to change.
(24) Charging-allowed time. Charging can only start within this time period. This is used for
off-peak charging setting.
If you want to charge out of this period, just press the forced on/off button at the side of the
charger.
Fig.20
Fig.21
(25) DC residual current sampling value calibration. Enter 0 and press “Set and Reboot” to
calibrate the DC RCD ring.
Fig.22
(26) (34) Bluetooth setting. Only needs setting when the charger is equipped with Bluetooth.
Fig.23
(27) (28) (35) 4G connection setting.
Fig.24
(31) This is for communication testing, no need to reset.
Fig.25
(33) DC residual current real-time detection value.
Fig.26
(36) Press this button for the parameter change to take effect.
Fig.27
(37) This is used to upgrade firmware.
Fig.28