8
Connect the charger to a computer via a network cable. Open the web browser and type in
http://192.168.1.5:8080/ in the address field and click enter, then the parameter setting page
of the charger will open up.
Parameter setting can only be done via web browser on a computer. It is suggested to use IE
or Firefox, other browser might have compatibility problem.
4.2 Configure parameters
5. Select "Use the following IP address" and enter the IP address, Subnet Mask,
Default Gateway. Click
OK
and close the Local Area Connection properties window.
Overview of Parameter setting page
7
Overview of Parameter setting page
enlarged view of parameter setting page_2
enlarged view of parameter setting page_1