ATEQ F600HP, Quick Start Manual

Page: 30 / 34

QSG_F600HP_425.00_EN_01_2021-01-25
30 / 34
Additional functions
Some functions are available depending on software version
.
Label Function Description
24V OUTPUTS Auxiliaries output 24 V Available outputs for external automatism
ABSOLUTE Absolute Display the absolute value of the results
ATF ATF time Absorb the important leak variations at the
defined time available with flow units only
ATR0 / ATR1 /
ATR2 / ATR3
ATR 0 - 3 Specific filters on leak measurement
BUZZER Buzzer Buzzer activation configuration
CODE READER Bar code reader Bar code configuration
CUT OFF Cut off All the measurements that are lower than the
configured rate have the value 0
DISP. OPT. Display option Display of an additional information on a second
line
DISPLAY MODE Display Mode Leak measurement resolution
DUMP OFF Dump off Avoids dumping (when activated in Configuration /
Pneumatic)
END OF CYCLE End of cycle Several automatism case depending on fail part
management
FILL MODE Fill types Special filling methods
FILTER Filtering Stabilize the measurement values
FLOW LEVEL Flow level Add a minimum fail parameter
NAME Name Program customization
NO NEGATIVE No Negative Replace negative value per 0
OFFSET Leak offset Leak offset value
PEAK HOLD Peak hold Give as result, the highest flow during the test
time
PR:SEQUENCE Sequencing Allowed program automatic sequencing
PRESS.CORR. Pressure correction Calculates leak at a defined pressure value (flow units)
PRESSURE DROP Pressure drop Pressure drop mode function in the Desensitized
mode
REWORK LIMIT Rework limits Additional levels for specific reworkable parts
SIGN Sign Return opposite result
STAMPING Stamp Pneumatic or electric output to identify the part
STD CONDITIONS Standard conditions Standard conditions correction with parameters (flow
units)
TEST TIME*100 Longer test time Allowed longer test time (1s = 100s)
UNITS Units Access to International System or American or
Custom Units
VALVE CODES Valve codes Available outputs for external automatism