.394.00_EN_01 / 2019-02-25
33 / 42
CONFIGURING THE ASSOCIATED MEASUREMENTS
3.
Select a measurement type and press .
The parameters of the selected measurement type are
displayed.
4.
Define the measurement cycle parameters.
See: Modifying a parameter.
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
2.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
MODIFYING A PARAMETER
Use this procedure to complete the test program setup.
On the
PARAMETERS
screen of the program (see: Preparing a program):
1.
Press
up/down
to select the parameter to
modify, and press .
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
2.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
An arrow
is displayed on the right of the parameter
being modified.
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
2.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
2.
Use the
up/down
keys to modify the
parameter value, and press to validate.
The arrow
returns to the left of the modified parameter.
TYPE : LEAK TEST
COUPL. A
0.0 s
2.0 s
2.0 s
1.0 s
1.0 s
bar
5.00
FILL TIME
STAB TIME
TEST TIME
DUMP TIME
Press. UNIT
Max FILL
PARAM / Pr 001
3.
Repeat these steps until all parameters are set.
4.
To return to the
MAIN MENU
screen, press
Esc
as many times as necessary.
Summary of Contents for F28+
Page 1: ...ATEQ F28 Quick Start Guide...
