ATEN VM6404HB, User Manual

Page: 111 / 125

Chapter 5. CLI Commands
101
Echo Command
The Echo function updates the RS-232 controller when operations are made via
the front panel pushbuttons, web browser, or telnet. The changes echo back to
the RS-232 controller to keep the settings in sync with the device.
The formula for the Echo command is as follows:
C C [Enter]
For example, to enable the echo feature, type:
echo on [Enter]
The following tables show the possible values for the Echo command
:
Note: Each command string can be separated with a space.
The following table lists the available Echo commands:
Command Description
echo Echo command
Control Description
on Turns Echo function on
off Turns Echo function off (default)
Command Control Enter Description
echo on [Enter] Turn on Echo function
echo off [Enter] Turn off Echo function