ATEN VM6404H, User Manual

Page: 38 / 107

VM6404H User Manual
26
Security Mode
The Security Mode page allows users to manage the VM6404H’s password-
related settings; the
Password
page configures the VM6404H to require a
password for local operation after the LCD display times out or is powered off/
on; the
Change Password
option allows users to set a new password for the
VM6404H.
To configure the VM6404H’s password settings from the Main Screen, use the
Menu
pushbutton to access the Menu page, press
4
to navigate to the next
pages, then press pushbutton
2
to access the Security Mode page.
Password
1. To set the VM6404H to require a password for local operation, press
pushbutton
1
.
2. To require a password after the LCD display times out or is powered off/
on, press pushbutton
1
. Otherwise, press pushbutton
2
.
Note:
If Password is Enabled, the LCD display’s default time-out is 5 minutes.
3. Press
Menu
to return to the Menu page.
4. Press
Cancel
to go back a level, return to the initial screen, or exit.
1: Operation Mode
2: Security Mode
:
Next
:
Prev
1. Password: Disable
2. Change Password
1. Password Enable
2. Password Disable