ATEN VM6404H, User Manual

Page: 31 / 107

Chapter 3. Front Panel Configuration
19
LCD Menu Organization
The VM6404H has a built-in configuration utility via the front panel LCD,
which can be controlled by pressing the
MENU
and front panel Input
pushbuttons (1–4). User can cycle through the menu options, starting from IP
Setting page, in the order shown in the table below:
Note:
The highlighted values are the default settings of the VM6404H.
Menu Pushbutton
Press the
MENU
pushbutton to switch between the Main Screen and LCD
Menu page. When the Menu is active, the MENU pushbutton’s built-in LED
lights up:
From the Menu page:
Š
Press
1
to go to the IP Setting page (see
IP Setting
, page 20)
Š Press
2
to go to the Serial Port Setting page (see
Serial Port Setting
,
page 21)
Š Press
▼
to go to the next page(s) for the sub-menu pages
Menu Page Sub-Menu Page(s)
IP Setting IP Address
Subnet Mask
Gateway
Serial Port Setting Baud Rate 9600 /
19200
/ 38400 / 115200
Operation Mode EDID
Default
/ Port1 / Remix / Customized
CEC On /
NA
OSD
On
/ NA
Output Status
On
/ NA
Security Mode Password
Enable
/ Disable
Change Password Old Password New Password
Save to a Profile Save to a Profile No. In: 01–04 / Out: 05-08
Play / Stop the Profile Schedule
1: IP Setting
2: Serial Port Setting
: Next