ATEN VE829 User Manual Download Page 4

Page: 4 / 42

VE829 User Manual

Package Contents

The VE829 package consists of:

1 VE829T 5x2 HDMI Wireless Extender

1 VE829R 5x2 HDMI Wireless Extender

2 IR Remote Control with batteries

1 Component Adapter Cable

1 IR Blaster Cable (Transmitter)

1 IR Sensor Extender Cable (Receiver)

1 HDMI cable

2 Power Adapter

1 User Instructions*

Check to make sure that all the components are present and that nothing got
damaged in shipping. If you encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of the
devices connected to it.

Features may have been added to the VE829 since this manual was printed.
Please visit our website to download the most up-to-date version.

Manual Date: 2013-10-02

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for VE829











































Search results

Summary of Contents for VE829

Reviews:

Brands by name

Popular brands

ATEN VE829, User Manual

Search results

Summary of Contents for VE829

Reviews:

Brands by name

Popular brands