ATEN VE66DTH, User Manual, Page: 24 / 41

Chapter 3. Operation
14
Web GUI
The ATEN VE66DTH can be remotely configured via web GUI, accessed
through a web browser and allows you to perform firmware upgrade, upload
SSL certificate, and setup access control for IP Installer.
Looking Up the Login IP Address
Follow the steps below to download IP Installer utility, and use the utility to look
up the IP address of your VE66DTH.
1. Go to the download link below:
https://www.aten.com/global/en/supportcenter/downloads/
2. Type in VE66DTH in the field below “Download materials for other
products” and press OK .
3. Scroll down the page to find IP Installer zip file under “Software & Drivers”.
Click the file to download.
4. Unzip and execute the downloaded IP Installer. The Network Device IP
Installer screen appears.
5. Click Enumerate to search for ATEN devices in the network. The detected
devices are shown in Device List.
6. Use the IP address of VE66DTH to log into the web GUI for firmware
upgrade.
Note: The VE66DTH will not be discovered by the IP Installer if the Access
Control is set to Disable. See
Access Control , page 21.