ATEN VE66DTH, User Manual, Page: 20 / 41

Chapter 2. Hardware Setup
10
Note: Please turn on the Pre-amp or Phantom Power if necessary.
5. Connect to the speakers, audio mixer or amplifier up to six channels to the
Line Output Ports.
6. To allow Dante audio over IP matrix and extension application. Use an
Ethernet cable to connect the Dante Link Port to a network switch.
a) The Dante Link LED lights solid orange when the connection is stable.
7. (Optional) Plug the Power Adapter cable into the Power Jack on the
VE66DTH. The VE66DTH can be powered on via an Ethernet cable if the
Dante Link Port (Ethernet) is connected to a PoE network switch.
a) The Power LED lights solid green when the power supply is stable.
Note: The VE66DTH prioritizes the power supply from the power adapter
when the Power Adapter is plugged in.
8. Power on all the connected devices.