ATEN VE66DTH, User Manual, Page: 14 / 41

Chapter 1. Introduction
4
Components
VE66DTH Front View
System Status LEDs
You can find the unit’s LEDs on the top and front panel as illustrated below. See
the table below for details on LED indication.
No. Component Description
1 HDMI Out Audio
Selection Switch Press the switch to send out the HDMI audio source.
2 Mic Input PRE-
AMP Switch Switch to enable and send out the Pre-amp audio inputs.
3 Mic Input
PHANTOM
Power Switch Switch to enable and send out the Phantom Power audio
inputs.
4 Reset Button Press and hold this button for more than 8 seconds to reset
the VE66DTH to its factory default settings.
No. LED Indication Description
5 Dante Link LED Lights orange The connection to the Dante link is stable.
Off There is no connection to the Dante link.
6 Power LED Lights green The unit is receiving power.
Off There is no power supply to the unit.
7 Audio Line
Output Status
LEDs Lights orange The audio signal is transmitting.
Off
The audio signal is not transmitting.
1 2 3 4 5 6 8
7