ATEN VC881, User Manual, Page: 14 / 25

VC881 User Manual
6
Installation
Before you proceed with the setup, make sure that all the equipment to be
connected is powered off and then follow the procedure below to safely install
your devices.
1. Ground the VC881 by connecting one end of the grounding wire to the
grounding terminal, and the other end to a suitable grounded object.
Note: Do not omit this step. Proper grounding helps prevent damage to the
unit from power surges or static electricity.
2. Connect an HDMI and/or DVI source device to the VC881.
Š For an HDMI source device, use an HDMI cable to connect the source
device’s HDMI Out port to the VC881’s HDMI In port.
Š For a DVI source device, use a DVI cable to connect the source
device’s DVI Out port to the VC881’s DVI In port and use an audio
cable to connect to the source device’s Audio Out port to the VC881’s
Audio In port.
3. Connect an HDMI display to the VC881 using an HDMI cable.
5
3
4
2
2
1
Media Player HDMI Source Device
HDMI Display Speaker
or
Home Theater System