ATEN VC1080, User Manual

Page: 31 / 38

3. Operation
23
Read Commands
View information from the device using the following command:
Read C Control [Enter]
The following tables show the possible values and formats for the Control
command:
Note: Each command string can be separated with a space.
The following table shows the available command list:
Verification
After entering a command, a verification message appears at the end of the
command line as follows:
Š
Command OK - indicates that the command is correct and successfully
performed by the VC1080.
Š
Command incorrect - indicates that the command has the wrong format
and/or values.
Powering Off and Restarting
If you power off the VC1080, follows these steps before powering it on again:
1. Power off the attached devices.
2. Unplug the power adapter cable from the VC1080.
3. Wait 10 seconds, and then plug the power adapter cable back in.
4. After the VC1080 is powered on, power on the attached devices.
Command Description
read Reads and displays information
from the VC1080
Control Description
version Displays the firmware version of
the VC1080
Command Control Enter Description
read version [Enter] Displays firmware
version