ATEN VC1080, User Manual

Page: 13 / 38

1. Introduction
5
Rear View
No. Component Description
1 Comp1 In Connect your component video source device to these
ports.
2 Comp2 In
3 A/V1 In Connect your composite video source device to these
ports.
4 A/V2 In
5 S-Video In Connect your S-Video source device to this port.
6 VGA In Connect your VGA source device to this port.
7 HDMI In Connect your HDMI source device to this port.
8 Stereo Audio Ports The red port is for the right audio channel, and the
white port is for the left audio channel.
9 Digital Audio Ports Connect the optical and coaxial audio cables to these
ports.
10 IR Extender Port Connect the IR Extender to this port.
Note: The additional IR receiver can be purchased
separately.
11 Grounding Terminal The grounding wire (used to ground the unit) attaches
here.
Note: The grounding wire is not included in this
package. Contact your dealer for more information.
12 HDMI Out Connect your HDMI display to this port.
13 Power Switch /
Power Jack
Plug in the power adapter to the power jack and use
the switch to power on the VC1080.
14 RS-232 Serial Port This is the serial remote port for input source selection
and high-end system control, including firmware
upgrade.
5
2
13
6
7 12 14
10
11
4
1
3
8
9