ATEN UC9020 StreamLIVE HD, User Manual

Page: 79 / 98

Chapter 8. Firmware Upgrade
67
Upgrade Assessment Fail
When the upgrade assessments fail (e.g. when no USB storage device is
connected or USB drive does not have a firmware upgrade file, etc.), the
GO
LIVE button and the last LED of volume meter LEDs will blink every 0.3
seconds.
Press the GO LIVE button to return the unit to normal operation and try again
from step 1.
Upgrade Fail
If firmware upgrade fails during the firmware upgrade (e.g. disconnected USB
storage device or power, etc.), the last LED of volume meter LEDs will blink
every 0.3 seconds.
The unit will reboot after some time and try to upgrade the firmware again.
If it fails again, it will reboot and try again.
When this happens, it is likely that the upgrade file is corrupted. We
recommend:
1. Unplug the power and the USB storage device from your UC9020.
2. Retrieve the firmware file again and recheck the USB preparation process
( Download Requirements ).
3. Replug your USB storage device.
4. Replug the power. The unit will start the upgrade process after booting up.
If you are still unable to upgrade the unit’s firmware, please contact your
dealer.
0.3s 0.3s
& &
0.3s 0.3s