Cabling
Serial to Parallel:
When performing a Serial to Parallel interface conversion:
1. Plug the attached serial cable (with DB 9 female connector) leading
out of the SXP-500 into the PC’s serial port
2. Plug the female end of a C-36 male/female printer cable into the
SXP-500’s printer connector
3. Plug the male end of the C-36 male/female printer cable into the
printer.
Note: If the distance to the printer is close enough, you can plug the
SXP-500 directly into the printer, without the need for a printer
cable.
- 4 -
2001 - 01 -10
