ATEN StreamLIVE PRO UC9040, User Manual

Page: 15 / 88

Chapter 1. Introduction
5
7 HDMI 2 Audio
Source Switches to the HDMI 2 Audio Source.
The button will light up when switched to this source.
8 HDMI 1 Audio
Source Switches to the HDMI 1 Audio Source.
The button will light up when switched to this source.
9 AFV Audio-Follows-Video: Pressing the AFV button will light
up. If the video source is selected, the source’s audio will
also be played.
10 HDMI 4 Audio
Source Switches to the HDMI 4 Audio Source.
The button will light up when switched to this source.
11 Mute Mutes/unmutes the audio the system is currently tuned
into.
When muting HDMI source 1, 2, 3, or 4, AFV will also be
turned off.
12 PGM Switches to the PGM audio source.
The button will light up when switched to this source.
Video Section (controls the video settings of the system)
13 Scenes Selector Selects the current stream (PGM) scene and the preview
(PRV) scene.
Greenly lit button indicates PRV Preview.
Redly lit button indicates PGM Preview.
Transition Control Section (switches the current stream (PGM) scene to the preview
(PRV) stream and vice versa)
14 Auto (transition) Pressing the Auto button will begin the transition after a
specified time (0.3-3.0 seconds).
Go to the Setting Deck and refer to page 46 on how to
modify this specified time.
Press and hold for 3 seconds to enter Quick Mode . Refer
to Edit the video scenes in scene editor, tune audio
settings in the audio mixer deck, adjusting audio delays
in the settings deck, etc. Tap Apply to apply the changes.
on page 64 for more information.
15 Cut (transition) The transition happens immediately when you press the
Cut button.
Press and hold for 3 seconds to enter Quick Mode . Refer
to Edit the video scenes in scene editor, tune audio
settings in the audio mixer deck, adjusting audio delays
in the settings deck, etc. Tap Apply to apply the changes.
on page 64 for more information.
No. Component Description