ATEN Phantom-S UC410 User Manual Download Page 84

Page: 84 / 89

Phantom-S User Manual

Firmware Upgrade Recovery

There are three conditions that call for firmware upgrade recovery:

When the unit’s firmware becomes corrupted and you are unable to
operate it.

When a firmware upgrade procedure is interrupted or the Phantom-S is
unplugged.

When a firmware upgrade procedure fails.

To perform a firmware upgrade recovery, do the following:

1. Unplug the Phantom-S from the computer.

2. Use a pen or paper clip to press the

Reset

button on the Phantom-S.

3. With the

Reset

button pressed, connect the Phantom-S to the computer via

the power and PC ports.

4. Hold the

Reset

button for 5 seconds.

5. Double click the

Firmware Upgrade Utility

to run it without the Phantom-

S software.

6. Upgrade the firmware as explained in

Performing the Upgrade

, page 71.

7. Unplug the Phantom-S from the computer.

8. Plug the Phantom-S into the computer.

Summary of Contents for Phantom-S UC410


























































































Search results

Summary of Contents for Phantom-S UC410

Reviews:

Related manuals for Phantom-S UC410

Brands by name

Popular brands

ATEN Phantom-S UC410, User Manual

Search results

Summary of Contents for Phantom-S UC410

Reviews:

Related manuals for Phantom-S UC410

Brands by name

Popular brands