ATEN PG98230 Series, User Manual

Page: 11 / 108

eco PDU PE Series User Manual
xv
About This Manual
This manual is provided to help you get the most out of your eco PDU. It covers
all aspects of the power distribution unit, including installation, configuration,
and operation. An overview of the information found in the manual is provided
below.
Chapter 1,
Introduction
, introduces you to the unit/system. It presents
purpose, features and benefits are presented, and its front and back panel
components are described.
Chapter 2, Hardware Setup , provides step-by-step instructions for setting
up your installation, and explains some basic operation procedures.
Chapter 3, Basic Operation and First-Time Setup , explains the
procedures that the administrator employs to set up the eco PDU network
environment, and change the default username and password.
Chapter 4, Logging In , describes how to log in to the eco PDU with an
Internet browser, and explains the layout and components of the user interface.
Chapter 5, Energy , describes how to monitor and configure the eco PDU
energy settings.
Chapter 6, User Management , describes how to configure the eco PDU
user management such as username and password.
Chapter 7, Log , describes how to read and export log from the eco PDU.
Chapter 8, Setup , describes how to configure and manage the eco PDU as a
whole.
Chapter 9, PDU , describes how to perform a firmware upgrade on the eco
PDU, or back up and restore files.
Chapter 10, Telnet Commands , describes how to connect to and access the
eco PDU’s using Telnet.
Appendix , at the end of the manual provides technical and troubleshooting
information.
Note:
 Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit and/or connected
devices.