ATEN PG98230 Series, User Manual

Page: 67 / 108

eco PDU PG Series User Manual
55
Authentication & Authorization
The Authentication & Authorization field is used to set up login authentication
and authorization management from external sources.
 RADIUS Settings
To allow authentication and authorization for the eco PDU device through a
RADIUS server, do the following:
1. Use the drop-down menu and select RADIUS .
2. Fill in the IP addresses and service port numbers for the Preferred and
Alternate RADIUS servers. The default port number for the Preferred
server is 1812; the default port number for the Alternate server is 1645.
Note: Make sure that the port numbers you specify here match the port
numbers used by the RADIUS servers.
3. In the Timeout field, set the time in seconds that the eco PDU device shall
wait for the RADIUS server to reply before it times out. The default
timeout is 3 seconds.
4. In the Retries field, set the number of allowed retries for attempting to
connect to the RADIUS server. The default retries is 3 times.
5. In the Shared Secret field, key in the character string that you want to use
for authentication between the eco PDU device and the RADIUS Server.
6. On the RADIUS server, set the entry for each user as follows: