manualshive.com logo in svg

ATEN PE7216r, User Manual

Share
Download
ATEN PE7216r User Manual Download Page 87

 Chapter 7. Device Management

77

„

IP Filter / MAC Filter

If any filters have been configured, they appear in the IP Filter and/or MAC 
Filter list boxes.

IP and MAC Filters control access to the eco PDU based on the IP and/or MAC 
addresses of the client computers attempting to connect. A maximum of 5 IP 
filters and 5 MAC filters are allowed.

To enable IP and/or MAC filtering, click to put a check mark in the 

IP Filter 

Enable

 and/or 

MAC Filter Enable

 checkbox.

Š

If the include button is checked, all the addresses within the filter range are 
allowed access; all other addresses are denied access.

Š

If the exclude button is checked, all the addresses within the filter range 
are denied access; all other addresses are allowed access.

Adding Filters

To add an IP filter, do the following:

1. Click 

Add

. A dialog box similar to the one below appears:

2. Specify the filter address in the dialog box (for example, 192.168.0.200), 

then click 

OK

.

A second dialog box, similar to the one below, appears:

Summary of Contents for PE7216r






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands