ATEN PE7216r User Manual Download

Page: 4 / 117

eco PDU PE Series User Manual

Package Contents

The eco PDU PE Series package consists of:

1 PE7216r / PE7324r or PE8216r / PE8324r or PE9216r / PE9324r

Power Distribution Unit

1 Power Cord (16-port models only)

4 Serial Adapter

1 Mounting Kit

1 CD-ROM

1 User Instructions*

Check to make sure that all of the components are present and in good order.
If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the switch or to any other
devices on the eco PDU installation.

Features may have been added to the eco PDU since this manual was
published. Please visit our website to download the most up-to-date version.

Manual Date: 2014-04-16

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for PE7216r






















































































































Search results

Summary of Contents for PE7216r

Reviews:

Related manuals for PE7216r

Brands by name

Popular brands

ATEN PE7216r, User Manual

Search results

Summary of Contents for PE7216r

Reviews:

Related manuals for PE7216r

Brands by name

Popular brands