eco PDU PE Series User Manual
52
IP Filter / MAC Filter
If any filters have been configured, they appear in the IP Filter and/or MAC
Filter list boxes.
IP and MAC Filters control access to the eco PDU based on the IP and/or MAC
addresses of the client computers attempting to connect. A maximum of 5 IP
filters and 5 MAC filters are allowed.
To enable IP and/or MAC filtering, click to put a check mark in the
IP Filter
Enable
and/or
MAC Filter Enable
checkbox.
If the
Include
button is checked, all the addresses within the filter range are
allowed access; all other addresses are denied access.
If the
Exclude
button is checked, all the addresses within the filter range
are denied access; all other addresses are allowed access.
Adding Filters
To add an IP filter, do the following:
1. Click
Add
. A dialog box similar to the one below appears:
2. Specify the filter address in the dialog box (for example, 192.168.0.200),
then click
OK
.
A second dialog box, similar to the one below, appears:
Summary of Contents for PE5220s
