manualshive.com logo in svg

ATEN PE5220s, User Manual

Share
Download
ATEN PE5220s User Manual Download Page 3

eco PDU PE Series User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual are subject to change 
without prior notification by the manufacturer. The manufacturer makes no representations or 
warranties, either expressed or implied, with respect to the contents hereof and specifically 
disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the 
manufacturer's software described in this manual is sold or licensed 

as is

. Should the programs 

prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its 
dealer), assumes the entire cost of all necessary servicing, repair and any incidental or 
consequential damages resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by 
unauthorized modifications to this device. It is the responsibility of the user to correct such 
interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the 
correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT 
THE VOLTAGE SETTING IS CORRECT BEFORE USE.

International

http://eservice.aten.com 

International

886-2-8692-6959

China

86-10-5255-0110

Japan

81-3-5615-5811

Korea

82-2-467-6789

North America

1-888-999-ATEN ext 4988

United Kingdom

44-8-4481-58923

Summary of Contents for PE5220s



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands