- 9 -
Installation
Refer to the diagram on the next page as you perform the
following steps:
1. Plug the cables for the USB keyboard, USB mouse, and
monitor into the CS-102U's Console port connectors.
2. Plug the USB B end of one the KVM cables supplied with this
package into the CS-102U's CPU 1 USB Port; plug the
cable's video connector into the CPU 1 Video Port.
3. Plug the USB A end of the KVM cable into the first computer's
USB Port; plug the cable's video connector into the
computer's Video Port.
4. Plug the USB B end of the second KVM cable supplied with
this package into the CS-102U's CPU 2 USB Port; plug the
cable's video connector into the CPU 2 Video Port.
5. Plug the USB A end of the KVM cable into the second
computer's USB Port; plug the cable's video connector into
the computer's Video Port.
6. If you choose to use an (optional) external 5V power adapter,
plug the adapter into an AC source, then plug the adapter
cable into the unit's Power Jack.
7. Power on all devices.
1. Make sure that the power to any device that you
connect to the installation has been turned off. You
must unplug the power cords of any computers that
have the
Keyboard Power On
function.
2. To prevent damage to your equipment due to
ground potential difference, make sure that all
devices on the installation are properly grounded.
Consult your dealer for technical details, if
necessary.
cs102u.fm Page 9 Friday, June 6, 2008 3:42 PM
