- 11 -
Operation
Manual Port Selection
With Manual Port Selection you simply press the Port Selection
Button on the CS-102U's top panel to switch the KVM focus back
and forth between computers. The Port LEDs light to indicate
which port has the focus.
Note:
The drivers for most USB devices (CCD Cameras,
Scanners, Printers, e.g.), are required to be shut down
before you disconnect the device, or else the system may
crash. When you switch computers with the Port Selection
Switch, it is the equivalent of disconnecting the device.
Therefore, if you have peripheral devices (other than a
second keyboard and mouse) connected to these ports,
you must be sure to shut down the USB drivers for them
before switching computers.
cs102u.fm Page 11 Friday, June 6, 2008 3:42 PM
