ATEN CE604 User Manual Download Page 31 | Manualshive

Page: 31 / 42

ATEN CE604 User Manual Download Page 31

Chapter 4. The Firmware Upgrade Utility

23

Remote Unit Mode

To prepare for the Firmware Upgrade, do the following:

1. Turn off the CE604R and unplug the power adapter.

2. In the Remote Unit’s front panel, press the

Wake Up

button at the same

time, plug in the power adapter and power on the CE604R. Note that the
LEDs are flashing.

3. Use a Serial RS-232 cross-spider cable to connect a COM port on your

computer to the CE604L’s RS-232 port.

Note:

The Serial RS-232 cross-spider cable is not provided in the package.

Starting the Upgrade

To upgrade your firmware:

1. Run the downloaded Firmware Upgrade Package file

(CE604R_ATEN_Vx.x.xxx.exe) – either by double clicking the file icon,
or by opening a command line and entering the full path to it.

The Firmware Upgrade Utility Welcome screen appears.

2. Read and agree to the

License Agreement

(enable the

I Agree

radio

button).

3. Click

Next

to continue. The Firmware Upgrade Utility main screen

appears:

«
...
29
30
31
32
33
...
»

Summary of Contents for CE604











































Reviews:

No comments