Chapter 1. Introduction
7
CE604L (Local Unit) Rear View
No.
Component
Description
1
Cable clip
Use this to clip the power adapter cable in place.
2
Power Jack
The cable from the power adapter connects here.
3
F/W Upgrade Switch
Use this switch to turn on the firmware upgrade mode.
Reset the power to proceed with the firmware
upgrade.
Switch it off and reset the power to return to normal
mode.
4
RS-232 Serial Port
Connect the RS-232 cable from your computer into
this port.
5
Sub / Main
The Cat 5e cable that connects the Remote and Local
Units plugs in here.
(Note: If another DVI signal and RS-232 / microphone
signals are needed, the Sub cable must be
connected.)
5
1
2
3
4