Step 4: Connecting a Telephone to your V810
a)
Complete Steps 1, 2 and 3 above.
b)
Plug one end of the telephone cord to the RJ11
Phone Port of your V810 and plug the other end of
the telephone cord into your telephone base. Note
that the two RJ11 ports use the same telephone
number.
Step 5: Initial Activation
Once the above 4 steps are completed, with a
service plan subscription, your V810 with
automatically detect the wireless network and
activate the SIM card services. The wireless
network and signal strength indicator will appear
on the status bar of your Welcome Home screen.
It might take a few minutes for the initial
activation.
If your V810 cannot
detect any network
services or if you have
SIM card issues, please
contact your wireless
service provider.
Note: The telephone and telephone cord are not
included.
Step 6: Making Calls
a)
Before making a call, make sure at least two
of the signal strength indicator bars ( ) are
lit up. If no signal bars are lit, move the V810
to a location that can receive a signal.
b) Pick up your telephone and dial the number
to place a call.
