Meet Your Device
ATEL
4G LTE Cat-4 Home Phone Connect
Voice-Only POTS Replacement
1.
LCD Display
Displays Home and Device
Information display screen
5.
SIM Card Slot
As needed, insert your 4FF
Nano SIM card into this spring-
loaded SIM slot. To remove,
press the SIM inward.
2.
Power Button
Power the V810 On/Off by
pressing and holding this
button for up to 10 seconds.
Short press to wake up the
screen.
6.
Type C Port
Use this port to connect the
USB-C cable to a wall adapter
for external power.
3.
Battery Port
Battery port connect to the AA
battery (AA batteries Included)
holder or a Ni-MH
rechargeable battery pack
(sold separately).
7.
Phone Port (RJ11)
Use a telephone cord to
connect your telephone base
to this port.
4.
Reset Button
Use a pin to push and hold this
button for 3 seconds for a
factory reset.
8.
Antenna Connector
Install an optional antenna
(sold separately) to increase
signal strength. You may have
to pull off the back rubber
cover prior to installing.
A quick look at your device:
Models Covered:
Version 2.3
Model
LTE Bands
V810T
B2/4/5/12/66/71
V810V
B2/4/5/12/13/66/71
