Atek ALC 77-T User Manual Download Page 2

Page: 2 / 15

INDEX

TECHNICAL FEATURES……….………….……………………………………………………………………………………….… 1

CONNECTIONS…………….………………..………………………………………………………………………………………... 2

DESCRIPTION OF FRONT PANEL ……………………………………………………………………………………………… 3

DEVICE PROGRAMMING ……………………..…………………………………………………………………………………. 4
4.1.

Entering Set Value to Device (set)……………………………………………………………………………….. 4

4.2.

Selection Of Input Type -Forward/Backward- (Cnt_typ)………………………….…………………… 5

4.3.

Entering of Constant (const)…………..………………………………………………………………………….… 5

4.4.

Selection of Point Position (point).………………..………………………………………………….……….… 6

4.5.

Selection Of Sample Time (SAMP.time)……………………………………………..………………………… 6

4.6.

Selection Of Time Unit (time.bas)………………………………………………………………………………… 7

4.7.

Relay Output Mode (output)………………………………………………………………………………………… 7

4.8.

Relay Output Time (tout)………………………………………….……………………………………………..….. 8

4.9.

Relay output Positions (out)…………..………………………………………………….………………………… 8

4.10.

Activating The Hold Input (hold)……………………..…………………………………………………………… 8

4.11.

Selection Of Sensor (NPN/PNP) Type (senstyp)………….………………………………………………… 9

4.12.

Return To Factory Defaults (factory)…………..………………………………………………………………. 9

4.13.

Password Protection (code_in).…….……………………………………………………………………………. 9

4.14.

ANNEX A – Graphics of Relay Output Types (out menu)………….………………………………….. 11

CERTIFICATE OF WARRANTY…………………………………………………………………………………………………… 12

Summary of Contents for ALC 77-T
















Search results

Summary of Contents for ALC 77-T

Reviews:

Related manuals for ALC 77-T

Brands by name

Popular brands

Atek ALC 77-T, User Manual

Search results

Summary of Contents for ALC 77-T

Reviews:

Related manuals for ALC 77-T

Brands by name

Popular brands