[41]
5.12.
Linear Hole Patterns (Milling)
Linear Hole Patterns Function is used to drill holes on the work piece as grid which includes requested line and
column number by user.
To make active linear hole patterns function
the table is moved to first hole which will be drilled.
button is
pressed and “Cos / F1” button is pressed. On the info screen there will be writing “LIN.ARRAY” . Press enter to make
active. By
buttons the plane is selected. Press enter to save. Please select the “STEP” or “LENGTH” from two
options by
buttons. Select the distance and press enter to save. Press enter to pass the other step. Press Sx
and enter the angle value. Press enter to save. Press
button and press Sx again and enter the column .numbers.
Press enter to save. Press Sy to enter the line numbers. Press enter to save. Press
button. You will see the
distance for the first hole. It will be “0”. After drilling press
button you will see the distance for the 2. Hole. Move
the table up to make zero the values and make drilling. Press
button to pass fallowing holes.and repeat the
same opeartions. Press
button to exit.
Example:
XY plane ,
Distance between column: 50mm
Line Distance: 40mm
Angle: 20
°
Column quantity: 3
Line quantity: 2
To use linear hole patterns function by the givens;
X
Y
50mm
40 mm
20
°
First Hole
1. Eksen
2nd Axis
Step 1
Step 2
Lenght 1
lenght 2
Angle
First Hole
1st Axis